在進行手板模型打樣的時候，做結構手板的很少能夠把外觀做得精美，做外觀手板很少能夠把精度做得高的。結構手板就是里面要裝電子元件的，要實現某些功能的，這樣的手板對精度要求是很高的；外觀手板就是用來參展的，對外觀處理的要求比較高。

When proofing the hand model, few structural hand models can make the appearance exquisite, and few appearance hand models can make the accuracy high. The structural hand board is equipped with electronic components to realize some functions. Such a hand board has high requirements for accuracy; The appearance hand board is used for exhibition, and the requirements for appearance treatment are relatively high.

之所以會出現這樣的情況，濟南手板廠家推測是因為很多手板模型打樣廠沒有站在客戶的角度思考問題，他們以為結構手板主要是用來進行試錯的，因此在外觀方面就沒必要那么嚴格。

The reason for this is speculated by Jinan hand board manufacturers that many hand board model proofing factories do not think from the perspective of customers. They think that the structural hand board is mainly used for trial and error, so it is not necessary to be so strict in appearance.

外觀手板是用來參展的，精度方面就沒必要做那么高，反正該有的功能實現了就可以了，沒必要做到面面俱到。當然，也不排除某些廠家的設備不是很好，很難做到精度和外觀處理都很好。

The appearance hand board is used for exhibition, so there is no need to be so high in accuracy. Anyway, it's ok if some functions are realized. There's no need to be comprehensive. Of course, it does not rule out that the equipment of some manufacturers is not very good, and it is difficult to achieve good accuracy and appearance treatment.

嘉瑞杰模型在給客戶進行打樣的時候，是非常關注這兩個方面的，盡量滿足客戶在精度和外觀方面的要。因此，無論是做結構手板還是外觀手板，廠家這邊都采用五軸機進行加工。

Jiaruijie model pays great attention to these two aspects when proofing customers, and tries to meet the requirements of customers in terms of accuracy and appearance. Therefore, the manufacturer adopts five axis machine to process both structural and appearance hand boards.

同時在噴油的時候，不僅努力把顏色調得準確，還要無塵車間進行噴油，因此這樣的手板，在精度和外觀方面都有著不錯的呈現。

At the same time, when spraying oil, we not only try to adjust the color accurately, but also spray oil in the dust-free workshop. Therefore, such a hand board has a good presentation in terms of accuracy and appearance.

手板廠在給客戶進行打樣的時候，不僅需要使用好的加工設備，同時還要站在客戶的角度思考問題，這樣才能做出滿足客戶苛刻要求的產品來。而嘉瑞杰模型正是抱著這樣的真心，才能做出好的手板，不僅顏值高，而且實用性強。

When making samples for customers, the hand board factory not only needs to use good processing equipment, but also needs to think from the perspective of customers, so as to make products that meet the demanding requirements of customers. The jiaruijie model is holding such sincerity to make a good hand board, which is not only beautiful, but also practical.

手板模型打樣從兩個方面進行關注的相關內容就講解到這里了，打樣的過程中也會出現一定的問題，所以提前做好預防工作非常的重要。更多內容就來網站www.csguangliang.com咨詢吧。

Hand model proofing from two aspects, the relevant contents of attention will be explained here. There will be some problems in the process of proofing, so it is very important to do a good job of prevention in advance. For more information, please visit www.csguangliang.com Consult. Com.